|
The racks¡¯ design standards of our company: 1. The schemes will be defined and carefully designed according to your technical parameters. 2. The specific design standard reference of our company is as below: Steel racks structure design codes (CECS23-90); The warehouse steel structure design standard (JB/T5323-91); Multi-structure design specification (GBJ9-87); The architecture structure design unified standards (GBJ68-84); The cold bending thin-walled steel structure technical specification (GBJ18-87); Steel structure design codes (GBJ17-88); The steel structure engineering construction and the acceptance standard work (GB50205-95). 3. All racks' design of our company meets the relevant national or international standards, epoxy-resin powder spraying - HG /T2597-94. Quality standard on the surface treatment : spray surface quality test standard/T9286 - 1998, the electrostatic powder spraying adhesion to GB/T9286-1998 standard, abrasion resistance standard GB6739-86, spraying thickness of GB/T1764-1979, impact test of GB/T1732¡ª1993. 4. Storage racks for steel SS400 is the cold-rolled steel plate, and the beam allowing the maximum deflection for length of 1/200, safety coefficient is 1.5.The adjustment for the height of the beam is 75mm, beam and upright for activities by buttoned connection, beam and hook welded by the cold-rolled plate materials. Strengthen slot is under the rack layer plate. The steel plate and the plate are connected by the screws.
| |
|